101
Teaching in additional hand and wall transmitters
You can teach up to 15 transmitters into the receiver of the TDEF motors and thus
realize e.g. individual, group, and centralized control of your roller shutters.
To teach in further transmitters, you need a transmitter that has already been pro-
grammed (taught in).
1. Press the
UP
and
DOWN
buttons at the same time on a transmitter that has
al-
ready been taught in
.
2. Then press the
STOP
button
8x
– also on the already taught-in transmitter.
3. The motor will vibrate briefly as confirmation.
4.
Within 5 seconds,
press the
UP and DOWN buttons
at the same time on
the
new transmitter to be taught in.
5. Then briefly press the
STOP
button on the transmitter to be taught in.
The motor will vibrate briefly again as confirmation.
The code has now been copied to the new transmitter.
UP and
DOWN
Already taught-in transmitter
New (additional) transmitter
8 x STOP
UP and
DOWN
STOP
Deleting the hand and wall transmitters
All taught-in (programmed) transmitters are deleted!
Individual deletion of a transmitter is not possible!
1. Press the
UP and DOWN
buttons at the same time on a transmitter that has
been taught in.
2. Then press the
STOP
button
6x
.
3. Press the
UP
button within 10 seconds.
The motor will confirm the deletion of the transmitters by vibrating briefly.
EINSTELLUNGEN
SETTINGS / PARAMÈTRES / AJUSTES / IMPOSTAZIONI / INSTELLINGEN /
USTAWIENIA / AYARLAR
