Japan Radio Co. JAX-9B, Instruction Manual, Page: 79 / 118

Chapter 4 Operation
65
4.7.1 Setting Internal Clock
Set the time of the internal clock.
The time is important parameter for timer program recording. If the time is not set right, the timer
program recording will be disabled. It is necessary to correct the time of the internal clock
periodically.
MEMO
•
When a GPS receiver is connected to JAX-9B, the time of the internal clock is
corrected automatically. However, in order to register the standard time to the
internal clock, it is necessary to set the time of the internal clock manually only once
after connecting to the GPS receiver.
Operation procedure
1)
: The current time of the internal clock is indicated in the 24-hour basis.
2)
-
: Input the time several ten seconds ahead from the actual current time.
3)
: Press [ENT] switch, when the input time matches to the current time.
4)
: End the current time indication mode.
No. Switch Indication
Description
1
•
Start the current time indication
mode. Displays current time of
built-in clock.
2
｜
Set the time 12:06:00.
[1]:
[2]:
[0]:
[6]:
[0]:
[0]:
•
Input the time that you desire to
set.
The "_"(underline) is indicated on
the digit to be input.
"_ " moves to the right when the
numerical value is input.
3
•
Confirm the input time.
Press [ENT] switch when the input