Japan Radio Co. JAX-9B, Instruction Manual, Page: 50 / 118

Chapter 4 Operation
36
c) Setting a Receiving Frequency by Group Channel
Operation Procedure
1) : Set the mode to the frequency channel readout mode.
2)
-
: Enter a group channel number:
10 groups of “00”, “10”
・・・・
“90” are available.
If a group channel is read out, the automatic frequency selection function starts scanning the
registered frequencies on the frequency channels in the selected group.
For example, the procedure of performing the automatic selection function by receiving frequencies
registered in the group channel “00” is described below.
No. Switch Indication Description
1
Start the frequency channel readout
mode.
2
Channel No.: Enter [0] and [0].
Successively indicate the receiving
frequencies registered in the
frequency channels “01” to “09” that
belong to the group channel “00”.
Select and indicate the frequency in
the best reception after making a
round of all frequencies.
NOTE
•
When the power is turned on, the automatic frequency selection function will be
performed on the group channel used in the previous operation.