Japan Radio Co. JAX-9B, Instruction Manual, Page: 44 / 118

Chapter 4 Operation
30
Manual Recording Mode
Preset the receiving parameters. Recording will be started only when JAX-9B receives the
broadcast matched with the preset parameters.
* Parameters: Density (IOC) = 576 / 288
Speed (Scan speed) = 60 / 90 / 120 / 240
* JAX-9B can receive (record) a FAX program from the middle of broadcast.
2) Starting the recording only at specified time
In the “Program Recording Mode,” JAX-9B only records the facsimile broadcasting at specified
time.
It is necessary to confirm the facsimile broadcasting schedule and register the starting time and the
finishing time according to the program that you desire to record.
Program Recording Mode
When power supply switch is set to the TIMER mode, the power supply becomes a standby
power supply (only the TIMER lamp lights) and enters the state of turning on only during
specified time, and the facsimile broadcasting is received (recorded).
3) Starting recording by force in manual operation
The recording is started coercively by starting operation of manual recording.
Forced Recording
Recording is started in accordance with the preset receiving parameters. Normal images
cannot be recorded if the preset parameters do not match with the broadcasting parameters.
Therefore, it is necessary to preset proper receiving parameters in manual operation and
synchronize the phase manually.
* This mode should be used when the receiving condition is so bad that the recording
cannot be started in the automatic/manual recording mode.