Japan Radio Co. JAX-9B, Instruction Manual

Page: 68 / 118

Chapter 4 Operation
54
4.5.4 Modifying Timer Program
The registered timer program can be modified.
Operation procedure
1) : Start the timer program registration mode.
2)
-
: Enter a program number for verifying.
Program number: 1 to 15, Total 15 channels
3)
n times
: The item to be modified will be indicated by “_” (underline).
When pressing the [ENT] switch, the indication position of
“
_
”
moves.
Press the [ENT] switch repeatedly until
“
_
”
comes to the modifying
item.
4)
•••
: Enter new data to modify the present data.
5) : Confirm the modified data.
6)
n times
: Set the half-tone parameter which is the final item.
It is necessary to execute this confirming operation until the final
parameter is set.
7)
: Complete the timer program modification and end the timer program
registration mode.
* After confirming the half-tone parameter (by the
[ENT] switch), complete the timer program
modification.
NOTE
•
When an erroneous parameter is inputted in the middle of setting, press the [CLR]
switch and re-enter the right parameter.
•
Even if the correction of modifying parts that you desire ends, complete the
confirmation of all setting (the last item is the registration of half-tone) by pressing
[ENT] switch repeatedly. If the confirmation of all items is not completed,
registration will be canceled.