TAIKO Service Manual
3-4
CHAPTER
3
© 2006 Japan Cash Machine Co.Ltd. All rights reserved.
Click
7. Hold in the upper cover open/close buttons once again, open the upper cover, and
grasp the TAIKO unit with your hand under the upper cover.
8. Insert the faceplate installation guide pin into the faceplate guide, and slide the TAIKO
unit all the way into the guide and then push down, as indicated by the arrows.
9. Close the upper lid firmly until it clicks into place.
- Confirm that the TAIKO unit and faceplate are installed se-
curely to the door.
- Cash Box and Stacker should be prepared by the user. Be sure
to have over 200mm widths space from the acceptor’s back-
side.
- Be careful not to get your finger caught when closing the up-
per lid.
- To remove the TAIKO unit, perform the procedure shown above in reverse
order.
