TAIKO Service Manual
2-16
CHAPTER
2
© 2006 Japan Cash Machine Co., Ltd.. All rights reserved.
8
7
6
5
4
3
2
1
ON
8
7
6
5
4
3
2
1
ON
LED Pattern Setting Mode
The LED pattern can be changed according to your perference. Select between pattern 1 and
pattern 2. The default setting is pattern 1.
t
Define Pattern 2
.
.
Define Pattern 1
Here on top you see two examples for DIP Switch settings.
t
Define3
LED Illumination Pattern Setting
1.•Make a note of the current Dip Switch settings of the unit in use.
2.•Power off.
3.• [Pattern 1] Power up the acceptor with DipSw1,2,7 = ON. Other switches = OFF.
[Pattern 2] Power up the acceptor with DipSw1,3,7 = ON. Other switches = OFF.
[Pattern 3] Power up the acceptor with DipSw1,7 = ON. Other switches = OFF.
[Pattern 4] Power up the acceptor with DipSw1,2,3,7 = ON. Other switches = OFF.
[Pattern 5] Power up the acceptor with DipSw1,4,7 = ON. Other switches = OFF.
[Pattern 6] Power up the acceptor with DipSw1,2,3,4,7 = ON. Other switches = OFF.
4.•Power up.
5.•Set DipSw1 = OFF, then LED illumination pattern is selected.
6.•If Setting is completed, Power OFF.
7.•Restore the original Dip Switch settings as noted in step 1.
8.•Power up.
9.•Acceptor returns to stand by mode and the setup is completed.
-•
PATTERN Table 1~6
1:
Change color one into another color with SOFT Crossing
-•#
2:
Change color one into another color with HARD Crossing
3: Lit in solid blue.
4: Lit in solid green.
5: Blink slowly in blue.
6: Blink slowly in green.
