background image

73 

 

73

****************************** 
      JCM GOLD ECR 
      MODEL J3500E 
      VERSION 1.00 
****************************** 
ANITA             R #0002 
 
#0000001 
COKE                2,000.00 
#0000002  
APPLE               2,000.00 
#00000003 
JUICE                                    60.00 
Item Counter                          3 
TOTAL            4,060.00 
Cash                  4,060.00 
     
16/05/2003  13-45        0039 

THANK YOU 

HAVE A NICE DAY 

 

 
 

11.15 PLU ARRANGEMENTS 

    It is possible to create, on J3500, until 9 PLU linking ; every PLU linking can be recalled 
by the code (from 1 to 9), or it can be called by the direct pression of a key. 
    Every PLU linking can automatic recall and print until 9 PLU. 
   

To input the code of the arrangement to recall, 
Eg. 1 (from 1 to 9) and to press the key 
"Arrangement PLU by code" (key not present 
like default on the J3500’s keyboard), or to 
press one of the keys "Hard PLU arrangement 
X" (key not present like default on the J3500’s 
keyboard). 

  - 

To continue with other registrations or to close 
the receipt, also using the change calculation 
or a mixed payment. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

11.16 temporary PLU operation 

  Both in standard and simple PLU mode of J3500, Temporary PLU registration can be done. 
To use this function, TEMP key should be allocated by free function keyboard arrangement. 
 
          (PLU code)            PLU            no PLU error            TEMP        NNNNNN        Dep’t       
NNNNNN : unit price   
 
TEMP key is only effective when you try to release error status of no PLU error. 
  Unit price and linked department after the TEMP key entry is stored as PLU data at this   
PLU code at the registration is completed. 
There is no difference of PLU print format. 
In case of standard PLU, initial data are following programmed. 
          Descriptor  : Pxxxxxxxxx (9digit from left of PLU code)   
     PLU status  

: “0”  Fixed price PLU 

   

 

No 

single 

item 

PLU 

    Taxable status :    follow with link department status 
  PLU group 

:  “0” 

  Once    temporary PLU is registered, this programming data is stored in J3500 even if   
you enter error correction key or void key after the registration. 

Summary of Contents for J3500E




























































































































Reviews: