34
34
7.15 PLU: STATUS
It is possible, on J3500, to execute the following procedure of programming for every
PLU that must be memorized on the ECR:
PROGRAMMING:
P (CCC...C) PLU (A B C D E F G H I) DEP’T #/NS
KEY
CCC...C =
PLU code (Max. 12 C/D)
A
=
PLU's Status (from 0 to 2 see table below)
BCDEFGHI
=
PLU's price (8 digits)
PLU's STATUS "A”:
Status Single
item +/-
0
1
2
No
Yes
No
+
+
-
Note: The sequence (CCC... C)-- PLU can be replaced from the reading by scanner of
The bar code of the product or from the pression of the hard PLU key
⇒
the sequence of Dept key can be replaced with “Dep’t# NN Dep’t# “.
Print format
Link dep’t
Status
PLU code
Descriptor
Unit price
7.16 PLU: DESCRIPTIONS
On PLUs it is possible to program 12,20 or 15 characters for description for each PLU.
PROGRAMMING To repeat for several PLU's codes
P (CCC….C) PLU X/time (XX,XX, XX,XX) X/time PLU #/NS
KEY
only if description inferior to 12,20 or 15 characters
CCC...C : PLU code (Max. 12 digits)
XX,XX...XX : description to insert by using the ten keys(12,20 or 15characters).
Note :
⇒
in order to cancel the last character input it is necessary to press the "E.C."
key
⇒
in order to obtain the characters in double width it is necessary to press the
key "," (decimal point) before the characters to program
⇒
in order to obtain the small characters it is necessary to press the "R.M." key
before the characters to program
⇒
the space corresponds to the key "00" (double zero).
⇒
The sequence (CCC... C) PLU can be replaced from the reading by
scanner of the bar code of the product or from the pression of hard PLU key
#2 2 02
PLU 2.54
Summary of Contents for J3500E
Page 55: ...49 49 ...
