Janome Memory Craft 6650, Instruction Book, Page: 99 / 108

q
w
97
Correcting Distorted Stitch Patterns
The sewing results of the stitch patterns may vary
depending upon sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If stretch stitch patterns, monogram or the stretch
buttonhole is distorted, correct it with the feed balancing
dial.
Set the feed balancing dial at the neutral position for
normal sewing.
q
Feed balancing dial
w
Neutral position
Stretch stitch pattern
Example: Pattern 095 (Mode 2)
If the pattern is compressed, turn the feed balancing dial
in the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
Stitch balance of the stretch buttonhole
Example: Pattern 030 (Mode 2)
If the right row is denser, turn the dial in the direction of “+”.
If the left row is denser, turn the dial in the direction of “–”.
Letters and numbers
Example: Pattern “8” (Pattern 060 in Mode 3)
If the pattern is compressed, turn the feed balancing dial
in the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
NOTE:
Return the feed balancing dial to its neutral position
when the sewing is finished.