Janome Memory Craft 6650 Instruction Book Download

Page: 11 / 108

Controlling Sewing Speed

Speed control slider

You can limit the maximum sewing speed with the speed

control slider according to your sewing needs.

To increase the sewing speed, move the slider to the right.

To decrease the sewing speed, move the slider to the left.

Foot Control

Pressing on the foot control can vary sewing speed.

The harder you press the foot control, the faster the

machine runs.

NOTE:

• The machine runs at the maximum speed set by

the speed control slider when the foot control is

fully depressed.

• You can select the desired start-up speed from

slow, medium or high (refer to page 35).

NOTE:

If you start the machine with the presser foot up, the

LCD screen will advise you to lower the presser foot.

Lower the presser foot and start sewing.

Operating Instructions:
Foot control model YC-485EC-1 is for use with this

sewing machine.

Summary of Contents for Memory Craft 6650













































































































Search results

Summary of Contents for Memory Craft 6650

Reviews:

Related manuals for Memory Craft 6650

Brands by name

Popular brands

Janome Memory Craft 6650, Instruction Book

Search results

Summary of Contents for Memory Craft 6650

Reviews:

Related manuals for Memory Craft 6650

Brands by name

Popular brands