Janome Memory Craft 6650 Instruction Book Download Page 41

Page: 41 / 108

4.5

9.0

0.0

5.00

1.00

2.40

Mode 1

Turn the stitch width adjusting dial clockwise to move the

needle drop position to the right.
Turn the stitch width adjusting dial counterclockwise to

move the needle drop position to the left.

Adjusting the Needle Drop Position

The needle drop position of the straight stitches can be

altered by turning the stitch width adjusting dial.

NOTE:

The value in brackets

indicates the preset setting.

The needle drop position can be adjusted for the

following straight stitch patterns.

Mode 2

Adjusting the Stitch Length

The stitch length can be altered by turning the stitch

length adjusting dial.

NOTE:

The value in the brackets

indicates the preset

setting.

Turn the stitch length adjusting dial clockwise to increase

the stitch length.
Turn the stitch length adjusting dial counterclockwise to

decrease the stitch length.

Stitch length

Summary of Contents for Memory Craft 6650













































































































Search results

Summary of Contents for Memory Craft 6650

Reviews:

Janome Memory Craft 6650, Instruction Book, Page: 41 / 108

Search results

Summary of Contents for Memory Craft 6650

Reviews: