background image

z

w

e

r

q

w

e

r

q

z

x

c

71

Fringing adds a special touch on table linens and shawls. 

Choose a firm, woven fabric like linen where threads can 

be removed easily.

z

 Carefully cut the fabric on the grain. Remove a single 

strand of yarn or thread where the fringing is to begin.

x

 Sew down the left side so the right hand stitches fall in 

the open space.

Drawn work uses the same method as fringing. Choose 

a firm, woven fabric like linen where threads can be 

removed easily.

z

 Carefully cut the fabric on the grain. Determine the 

width of the drawn work and remove one strand of 

yarn or fabric thread at each end.

c

 Remove all excess yarn located to the right of the 

stitching and create a fringe.

Fringing

q

 

Pattern:  

 

MODE 2: 036

w

 

Presser foot:  

Satin stitch foot F

e

 

Thread tension:  

3-6

r

 

Foot pressure:  

2

Drawn Work

q

 

Pattern:  

 

MODE 2: 036

w

 

Presser foot:  

Satin stitch foot F

e

 

Thread tension:  

3-6

r

 

Foot pressure:  

2

Summary of Contents for Memory Craft 6650













































































































Reviews: