manualshive.com logo in svg

janitza UMG 96RM-P, Operating Instructions And Technical Data

The janitza UMG 96RM-P is a highly efficient power monitoring device that helps you keep track of your energy consumption. With its user-friendly interface and advanced features, this device enables you to monitor and analyze power data effectively. Download the free manual for the janitza UMG 96RM-P from manualshive.com and unlock the full potential of this exceptional product.

Share
Download
background image

93

UMG 96RM-P/-CBM

Firmware update

If the device is connected to a computer via Ethernet, 
then the device firmware can be updated via the GridVis 
software.

Select a suitable update file (menu 

Extras / Update de-

vice

) and the device and the new firmware will be trans-

ferred. 

Abb. Firmwareupdate-Assistent der Software GridVis

Battery

The internal clock is fed from the supply voltage. 
If the supply voltage fails then the clock is powered 
by the battery. The clock provides date and time infor-
mation, for the records, min. and max. values and re-
sults, for example.

The life expectancy of the battery is at least 5 years with 
a storage temperature of +45°C. The typical life expec-
tancy of the battery is 8 to 10 years. 

The battery is replaced via the battery insert provided 
on the rear of the device. Make sure that the correct 
type of battery is used and correct polarity is observed 
when inserting the battery (positive pole faces the rear 
of the device; negative pole faces the front).

See chapter "Changing the battery" for more informa-
tion.

Summary of Contents for UMG 96RM-P

































































































































Reviews:

No comments

Related manuals for UMG 96RM-P

Camille Bauer SINEAX AM2000 Device Handbook preview
SINEAX AM2000
Brand: Camille Bauer Pages: 62
Camille Bauer SIRAX MM1200 Safety Instructions preview
SIRAX MM1200
Brand: Camille Bauer Pages: 12
Hach Surface Scatter 7 sc Instruction Sheet preview
Surface Scatter 7 sc
Brand: Hach Pages: 6
Hach sensION+ DO6 Manual preview
sensION+ DO6
Brand: Hach Pages: 118
Hach sensION+ EC5 User Manual preview
sensION+ EC5
Brand: Hach Pages: 388
Hach Orbisphere 51 Series User Manual preview
Orbisphere 51 Series
Brand: Hach Pages: 118
Hach ORBISPHERE 3650 Atex User Manual preview
ORBISPHERE 3650 Atex
Brand: Hach Pages: 51
Hach sensION+ EC71 Manual preview
sensION+ EC71
Brand: Hach Pages: 72
Hach POLYMETRON 8362 User Manual preview
POLYMETRON 8362
Brand: Hach Pages: 78
HACH LANGE Pocket Colorimeter II Basic User Manual preview
Pocket Colorimeter II
Brand: HACH LANGE Pages: 146
Hach Sigma 950 Instrument Manual preview
Sigma 950
Brand: Hach Pages: 146
Hach 2200 PCX User Manual preview
2200 PCX
Brand: Hach Pages: 36
Hach PHOSPHAX indoor sc User Manual preview
PHOSPHAX indoor sc
Brand: Hach Pages: 104
Hach Lange ORBISPHERE 3100 Basic User Manual preview
Lange ORBISPHERE 3100
Brand: Hach Pages: 384
Hach 5500sc SiO2 Installation Manual preview
5500sc SiO2
Brand: Hach Pages: 172
KALEAS 34058 Operating Instruction preview
34058
Brand: KALEAS Pages: 64
SIGLENT CP4000 Series Instructions Manual preview
CP4000 Series
Brand: SIGLENT Pages: 32
Toro Turf Guard Installation Setup Manual preview
Turf Guard
Brand: Toro Pages: 60

Brands by name

Popular brands

Load more brands