janitza UMG 96RM-P Operating Instructions And Technical Data Download Page 74

Page: 74 / 128

UMG 96RM-P/-CBM

Installation of USB driver

With internet access or authorisation for automatic
updates of the driver library:

With all current operating systems (e.g. Windows 7)
the required drivers are automatically installed the first
time the device is connected to the USB interface of the
computer.

• Connect the power supply voltage for the UMG

96RM-P/-CBM, as a minimum.

• Connect the UMG 96RM-P/-CBM to a suitable

USB interface on the computer with the USB cable
provided.

• The installation of the system drivers required

starts and runs automatically.

• After successful installation the device can be

used.

With missing internet access or missing authorisation for
automatic updates of the driver library or with Windows
XP SP2:

• Windows system

Start the setup program in the
UMG96RM/USB drivers/Windows folder on the CD
provided. The drivers required will be installed.

• Linux system

Follow the instructions in the Readme file in
the UMG96RM/USB drivers/Linux folder.

• Connect the power supply voltage for the UMG

96RM-P/-CBM, as a minimum.

• After successful installation, connect the UMG

96RM-P/-CBM to a suitable USB interface on the
computer with the USB cable provided.

Summary of Contents for UMG 96RM-P

































































































































Search results

Summary of Contents for UMG 96RM-P

Reviews:

Related manuals for UMG 96RM-P

Brands by name

Popular brands

janitza UMG 96RM-P, Operating Instructions And Technical Data

Search results

Summary of Contents for UMG 96RM-P

Reviews:

Related manuals for UMG 96RM-P

Brands by name

Popular brands