janitza UMG 512-Pro, User Manual And Technical Data

Page: 102 / 120

UMG 512-PRO www.janitza.com
102
15. Technical data
General
Net weight (with connectors) approx. 1080 g (2.38 lbs)
Device dimensions Approx. W = 144 mm (5.64 in), H = 144 mm (5.64 in),
D = 75 mm (2.95 in)
Battery Type LMO CR2450, 3 V
(UL 1642 approved)
Clock - temperature range: -40 °C (-40 °F)
to +85 °C 185 °F)
+-5 ppm (equivalent to 3 minutes per year)
Impact resistance IK07 according to IEC 62262
Transport and storage
The following information applies to devices that are transported or stored in their
original packaging.
Free fall
1 m (39.37 in)
Temperature -25 °C (-13 °F) to +70 °C (158 °F)
Environmental conditions during operation
The device is intended for weather-protected, stationary use and must be connected to the ground
wire connection! Protection class I according to IEC 60536 (VDE 0106, Part 1).
Working temperature range
-10 °C (14 °F) to +55 °C (131 °F)
Relative humidity 5 to 95% at 25 °C (77 °F), no condensation
Operating elevation 0 .. 2000 m (6562 ft) above sea level
Pollution degree 2
Mounting orientation Vertical
Ventilation Forced ventilation is not required.
Protection against foreign matter and
water
·Front
·Rear
IP40 according to EN60529
IP20 according to EN60529
15.1 Supply voltage
Supply voltage
Installation overvoltage category 300 V CAT III
Fuse protection of the supply voltage
(fuse)
6 A, type B (approved according to UL/IEC)
Option 230 V:
·Nominal range
·Operating range
·Power consumption 95 V .. 240 V (50/60 Hz) / DC 80 V .. 300 V
+-10% of nominal range
max. 7 W / 14 VA
Option 24 V:
·Nominal range
·Operating range
·Power consumption 48 V .. 110 V (50/60 Hz) / DC 24 .. 150 V
+-10% of nominal range
max. 9 W / 13 VA
Connecting capacity of the terminals (supply voltage)
Connectible conductors. Only connect one conductor per terminal point!
Single core, multi-core, fine-stranded
0.2 - 4.0 mm
2
, AWG 28-12
Wire ferrules (non-insulated) 0.2 - 2.5 mm
2
, AWG 26-14
Wire ferrules (insulated) 0.2 - 2.5 mm
2
, AWG 26-14
Tightening torque 0.4 - 0.5 Nm (3.54 - 4.43 lbf in)
Strip length 7 mm (0.2756 in)