If your control is a POOL and SPA combination with a 2-speed fi ltration pump, the control will operate as
follows: HIGH SPEED (Filter Pump) must be on before LOW SPEED. Filter pump button, as well as the Spa
button, turns it to HIGH SPEED. LOW SPEED (AUX 2) button toggles back and forth from LOW to HIGH.
To use HIGH/LOW Speeds, Filter Pump turns on HIGH SPEED, AUX 2 turns on LOW SPEED. Whatever mode
last used is the OFF button. To toggle, press whichever speed is not on.
AquaLink
®
RS 2/6 operates the same as the Pool/Spa Only units; i.e., Filter Pump turns on HIGH SPEED and
AUX 2 turns on LOW SPEED. The mode last used is the OFF button. To toggle, press whichever speed is not on.
2-speed works only on spa fi lter pump.
When programming HIGH and LOW Speeds to operate together, think of HIGH SPEED (Filter Pump) as total
duration of fi ltration time, then set Low Speed (AUX 2) to operate within that duration. For example, if you want
High Speed on for 2 hours and Low Speed for 10 hours, program the Filter Pump (High Speed) from 8 AM to 8
PM and Low Speed from 10 AM to 8 PM.
Turning on the spa activates the filter pump. The SPA mode must be on to display the spa temperature and/or to heat
the spa.
Highlight SPA PUMP and press SELECT. Use the SELECT button to turn the spa on or off.
OFF
FILTER PUMP OFF
SPA PUMP
POOL HEAT
SPA HEAT
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUXB1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
MORE
FILTER PUMP
SPA PUMP
POOL HEAT
SPA HEAT
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUXB1
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
MORE
