Page 12
4.6
Boost Menu
Activates the BOOST POOL feature that will operate the AquaPure
®
Chlorine Generator at 100% output for 24 hours.
Boost Pool mode will override all filter pump programs as well as manual operations. BOOST is not available in SPA
MODE.
4.6.1
To use the Boost Pool Menu
1.
Press the MENU button. Use the FORWARD or BACK buttons to move to the BOOST POOL Menu and
press ENTER.
2.
Use the FORWARD or BACK buttons to toggle between on and off. When the option you want is displayed,
press ENTER.
4.5
Set Time Menu
The SET TIME menu allows the correct time and date to be entered. The correct time and date ensures that
programming will work properly.
4.5.1
To set the time
1.
Press the MENU button. Use the FORWARD and BACK buttons to move to the SET TIME Menu and press
ENTER. The AquaLink
®
RS display will read YEAR 1998
<—>*
.
2.
Use the FORWARD and BACK arrow buttons to change the year. When the correct year is displayed, press ENTER.
3.
Repeat this process for month, day, hour, and minute. When you are nished, the display will show the correct time
and date.
4.4
Set Temperature Menu
The SET TEMP menu allows you to preset the pool and spa thermostats. The default pool temperature is 80°F. The
default spa temperature is 102°F. (The default TEMP1 temperature is 80ºF. The default TEMP2 temperature is 60ºF.)
SET TEMP will allow you to enable the Maintain Temperature feature and adjust the hours to limit the time of day the
Maintain Temperature feature will be active.
NOTE You cannot set the solar temperature. Solar heating will activate when the solar button is pressed, the solar temperature is
at least 5º higher than the water temperature, and the water temperature is lower than the thermostat setting.
4.4.1
To set the pool and/or spa tem per a ture
1.
Press the MENU button. Use the FORWARD and BACK buttons to advance to the SET TEMP
Menu and
press ENTER. The AquaLink
®
RS display will read SET POOL TEMP
<- ->*
.
2.
Use the FORWARD and BACK arrow buttons to choose between SET POOL TEMP and SET SPA TEMP.
If you have a pool only or spa only, the choice will be between
TEM P1
and
TEM P2
. When the temperature
you want to set is displayed, press ENTER.
3.
The AquaLink
®
RS display will show the current thermostat setting. Use the FORWARD and BACK arrows
to move the temperature up and down. When the temperature you want is displayed, press ENTER.
MAINTAIN:
While in SET TEMP menu, scroll to MAINTAIN and press ENTER to turn on (or off) this
function. MAINTAIN will run the pump for the selected body of water to keep the water at the desired
temperature. When this feature is on, the system will periodically activate the pump, sample the water, and
re the heater to maintain the preset temperature as required. The heater must be enabled for this feature to
maintain temperature.
HOURS:
While in SET TEMP menu, scroll to HOURS and press ENTER. Use the FORWARD or BACK
buttons to change the HOURS the system will maintain the preset temperature.
NOTE Only Dual Equipment models will maintain more than one body of water.