The default label is SPEED4.
For the Pool Pump the default label is POOL HEAT. When the pool heater is enabled the pump will run at this speed.
For the Spa Pump the default label is SPEED5.
For the Pool Pump the default label is SPEED6.
For the Spa Pump the default label is SPA HEAT. When the spa heater is enabled the pump will run at this speed.
For the Pool Pump, if the system is in the SOLAR HEAT mode or the HEAT PUMP mode then the pump will run at
this preset speed. If the system is not configured for solar heat or a heat pump then the default label will be SPEED7.
For the Spa Pump the default label is SPEED7.
For the Pool Pump, when the In-Floor clean mode is enabled and the pump is running, it will be running at this preset
speed.
For the Spa Pump the default label is SPEED8.
This menu allows the user to assign a speed to an auxiliary. When the assigned auxiliary is turned on the pump will
switch to the speed that was assigned to the aux. If more than one aux is on and if both of them have speeds assigned,
the pump will operate at the higher of the two speeds.
In the VSP SETTINGS menu, highlight SPEED/LABELS and press SELECT. Use the UP/DOWN arrow keys to
highlight the desired pump, then press SELECT. Use the UP/DOWN arrow keys to highlight ASSIGN SPEEDS, then
press SELECT. Use the UP/DOWN arrow keys to highlight the desired auxiliary, then press SELECT. Use the UP/
DOWN arrow keys to highlight the desired speeds, then press SELECT.
