Jands Event Plus Operating Manual Download Page 78

Page: 78 / 153

78 Event V3 Manual

Managing Memories & Chases

12.32 Adding Fade Times to a Chase

Press the Chase button.

Enter the required Chase number (0 - 999) using the numeric keypad or alter-
natively use the

(On)/

(Off) button to change the displayed number.

Move the cursor to the MORE field, and keep moving the cursor to the
INFADE field after the MORE window of Chase opens.

Enter an Infade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the

(On)/

(Off) button to change the exist-

ing value.

Diagram 12H

Use the arrow buttons to move the cursor to the OUTFDE (Outfade) field.

Enter an Outfade time of up to 99 minutes 59 seconds using the numeric
keypad or alternatively use the

(On)/

(Off) button to change the exist-

ing value.

Press the Exit button if no more Chases are to be set.

☞

NOTE:

Do NOT press the Record button if only entering or changing the fade times.

Summary of Contents for Event Plus


























































































































































Search results

Summary of Contents for Event Plus

Reviews:

Related manuals for Event Plus

Brands by name

Popular brands

Jands Event Plus, Operating Manual

Search results

Summary of Contents for Event Plus

Reviews:

Related manuals for Event Plus

Brands by name

Popular brands