Jands Event Plus Operating Manual Download Page 140

Page: 140 / 153

140 Event V3 Manual

Advanced Features

26.00 Setting the Intensity of the

Desklights

The Event can be fitted with optional gooseneck type desklights. The brightness of
the lights can be set in the Setup Desk Display menu.

1. Press the Setup button to open the Setup menu.

2. Move the cursor to the DESK field and press the

(On) button to open the

Set Desk menu.

3. Move the cursor to the DISPLAY field and press the

(On) button to open

the Setup Display menu.

4. Move the cursor to the LAMP field and adjust the setting between 0 and FF

using the

(On)/

(Off) buttons or the numeric keypad.

5. Press the Exit key to close the menu.

NOTE:

The desk lights can NOT be dimmed off.

Summary of Contents for Event Plus


























































































































































Search results

Summary of Contents for Event Plus

Reviews:

Related manuals for Event Plus

Brands by name

Popular brands

Jands Event Plus, Operating Manual

Search results

Summary of Contents for Event Plus

Reviews:

Related manuals for Event Plus

Brands by name

Popular brands