Jands ESP II 24, Operating Manual

Page: 7 / 53

7
Description of Major Parts
D Scene Master Faders
The Scene Masters are used to fade Scenes up and down. They also
control Chases that have been Assigned to a Scene Master.
E The Scene Flash Buttons
These buttons are used to momentarily flash on a Scene (or Chase).
F The LCD Display
The backlit LCD screens display the current Page, Chase, FX and
Xfade settings. It is also used to display various menus during editing
and console setup.
G The Function Buttons
There are 8 buttons:
Left and Right Arrow - move the cursor in the LCD.
Plus (+) and Minus(-) - change values for Page, Chase, etc.
Edit - Press and hold Edit then press a Flash button to open the Edit
menu
Setup - Press to open the Setup menus.
Exit - Press to close a menu.
Record - Press and hold Record then press a Flash button to Record a
Scene, Chase, FX or Xf.
H The Chase Controls.
There are five controls in the Chase section:
A level fader
A Flash button which is used to run one cyle of the chase pattern and
to single step a stopped chase.
A rotary rate control
A direction button
An Assign button - Press the Assign switch then any Scene Flash
button to assign a Chase to the control of a Scene Master.
I The FX controls (Effects)
Intended for use in controlling color scrollers. The fader controls the
FX level while the Flash button is used to step through the FX. Up to
100 FX can be recorded.
J The Xfade controls (Crossfades)
These controls are used to run timed crossfades. The fader controls
the fade rate while the Flash button is used as the cue GO button. A
cue consists of an Xfade number (0-9) and a Q number (0-99).