Jands ESP II 24, Operating Manual

Page: 52 / 53

52
Ommissions & Additional Information
Making a Chase part of a Page
When a Chase is Assigned to a Scene Master that has not been recorded
it will become part of that page. Any time that Page is loaded the
Assigned Chase will also load.
If a Scene is subsequently recorded on the Scene master being used to
control the Assigned Chase the Chase will no longer form part of that
Page.
Deleting a Scene, FX, XF Cue.
To delete a Scene, FX or XF Cue.
•
Set the desk output to zero by moving the Grand Master to zero
• Hold the Record button down and press the Flash button (beneath the
Scene, FX, XF or Chase fader) of the item to be deleted.
• A message displays on the LCD indicating that the desk output is
very low and offering the option of recording zero levels or deleting
the item.
• Release both buttons.
• Press the Minus (-) button.
• The item is deleted.
Deleting a Chase
To delete all steps of a Chase
1
Hold the EDIT button down and press the Chase Flash button.
2 Move the cursor to the STep field.
3 Set the Step number to 1
4 Move the cursor to the DELete field.
5 Press the Plus (+) button.
• A warning message is displayed on the LCD
6 Press the Plus (+) button again.
• Note that the Chase is shortened by one step.
• Repeat steps 5 & 6 until all steps have been deleted.