34
corded and how many are still available.
•
Release both buttons.
•
Repeat the last three steps for each subsequent step of the Chase.
NB
* When the Record button is pressed, the Chase STEP field stops count-
ing and automatically changes to allow a new step to be added.
Setting the Chase Step to Record
It is possible to record over an existing Chase step by stopping the Chase.
•
Use the Rate control to stop the Chase. (Turn fully counter clock-
wise)
•
Use the Chase flash button to Step the Chase to the required step
•
Use the Preset faders (and any other console controls) to set up the
lighting output required for the first step of the Chase.*
•
Use the Preset faders (and any other console controls) to set up the
lighting output required
•
Hold the Record button down and press the Flash button (beneath the
Chase fader).
•
A message displays on the LCD showing the number of items re-
corded and how many are still available.
•
Release both buttons.
NB
* If the Chase fader is up any changes will be added to the old step. To
completely replace the step ensure the Chase fader is at zero when
recording.
More Information
Pg # Editing a Chase
Pg # Blind Recording using the EDIT CHASE menu.
Summary of Contents for ESP II 24
