Jands ESP II 24, Operating Manual

Page: 31 / 53

31
Menu Fields
Settings
Edit Pg:Sc Ch To At
Scene 1 12 1 12 FF
Page Number
TheEdit Scene Menu
Editing a Scene
PG: (Page Number)
Page number sets the Page of the Scene to be edited. To change
this number move the cursor to The PG: field and use the Plus (+)
and Minus (-) buttons to change the number.
SC: (Scene Number)
Sets the Scene to be edited. To change this number move the
cursor to The SC: field and use the Plus (+) and Minus (-) buttons
to change the number.
CH (Channel)
Can be set using the Plus (+) and Minus (-) buttons or by moving
any of the TOP preset faders. Moving a top preset (P1) fader sets
the channel (CH) field to that number.
TO Can only be changed by using the Plus (+) and Minus (-) buttons
(the slider method is not available). Changes to level will effect all
channels from the CH number to the TO number, inclusive.
AT Used to set a new level for the Channel or channels set by the CH
and TO fields. AT can be changed by using the Plus (+) and
Minus (-) buttons or by moving the TOP preset fader until its level
matches the previously recorded level. Once a match has been
acheived the slider takes control of the level and can be used to set
the AT field.
For the slider to ‘take control’ of a channel recorded at Zero level
(AT=0) it is necessary to move the slider above zero, to select the
channel, then back to zero to match the level, then to the new level
setting.
Level
End of Channel Range
Channel to Edit
Scene Number