Jands ESP II 24, Operating Manual

Page: 14 / 53

14
The Function Buttons
The Cursor Buttons
The left arrow and right arrow buttons are used to move the cursor to the
various fields in the LCD display window.
The Plus (+) On and Minus (-) Off Buttons
These buttons are used to change values. The plus button will either
increase a value or change a setting from off to on. Likewise the - button
will decrease values or change a setting from On to Off. These buttons
are also used in a few menus to toggle between several choices. These
buttons operate in three ways.
1 Press. The value increases by 1 with the + button or decreases by
1with the - button
2 Press and Hold. The value scrolls up with the + button or down with
the - button
3 Double Press. The value snap to the maximum for that field with the
+ button or to 0 with the the - button. It may take a couple of attempts
to double press at a fast enough speed to see this work.
The Edit Button
The EDIT button is used in conjuction with the Scene, Chase, FX and XF
flash buttons to open the Edit menu. Hold the button down for approxi-
ametly 2 seconds to show a help message.
The Setup Button
The SETUP button is used to open the Setup Menus.
The Exit Button
The EXIT button is used to close the menu. Hold the button down for
approxiametly 2 seconds to show the ESP II software version number.
The Record Button
The RECORD button is in conjuction with the Scene, Chase, FX and XF
flash buttons to store levels.. Hold the button down for approxiametly 2
seconds to show a help message.
O N
➩
➩
D
X
SETUP
EDIT