Jamar Black Cat II Plus, User Manual, Page: 28 / 44

Black Cat II Plus Radar Recorder User’s Manual
3-10
Once back on the connection screen, select the site you just created and
click Connect. STARnext will attempt to connect to the Black Cat II Plus
Radar Recorder and, if successful, show the current status of the unit.
Once connected, the middle of the screen will show the Counter Info,
which includes:
• Battery voltage – the current voltage of the battery. A fully charged
battery should be around 13V or higher. The Radar will not be able to
start if the voltage is below 12V.
• Count Type – typically either Per Vehicle or Realtime
• Counter Status – this will be either Not Counting if no count is in
progress or Counting... if a count is in progress.
• Date/Time – this is the date & time current programmed in the unit.
You will be shown a warning that the date and time are not correct if they
are not within a minute of the computer’s date and time. This will be
automatically corrected the next time you upload settings to the unit.