Jamar Black Cat II Plus, User Manual

Page: 20 / 44

Black Cat II Plus Radar Recorder User’s Manual
3-2
Connecting to Your Computer – USB Port
Once you have the Black Cat II Plus Radar Recorder installed, it needs to
be programmed to record the data you want. To do this you'll need to con-
nect a USB cable from your computer to the Black Cat II Plus's USB Port.
The Black Cat Plus II uses a Micro B USB port.
Note that BEFORE you connect your computer to the Black Cat II Plus
for the first time, run the USB Driver Installation Program, which can be
found on the STARnext software flash drive.
STEP 1 – Open the case of the
Black Cat II Plus Radar Recorder.
(Note that you will need to con-
nect a charged battery to the Black
Cat II Plus before attempting to
connect to it.)
STEP 2 – Press the Wake button to
‘wake up’ the Black Cat II Plus. The
On/Alarm
light will be on when the
unit is awake. Note that you must
always ‘wake up’ the Black Cat II
Plus before you connect when us-
ing the USB cable.
STEP 3 – Once the Black Cat II
Plus is awake, plug the USB cable
into a standard USB port on your
computer.
Connecting the Black Cat II Plus
Radar to Your Computer
There are four ways to connect the Black Cat II Plus Radar Recorder to
your computer:
• Direct hardwire USB connection.
• Local wireless Bluetooth connection.
• Direct hardwire Ethernet connection.
• Remote modem connection (optional).