Jamar Black Cat II Plus, User Manual

Page: 22 / 44

Black Cat II Plus Radar Recorder User’s Manual
3-4
Once the Black Cat Radar Recorder Setup screen appears, select the COM
Port from the dropdown box and click the Connect button.
STARnext will attempt to
connect to the Black Cat II
Plus Radar Recorder and,
if successful, show the cur-
rent status of the unit.
Once connected, the
middle of the screen will
show the Counter Info,
which includes:
• Battery voltage – the
current voltage of the bat-
tery. A fully charged battery should be around 13V or higher. The Radar
will not be able to start if the voltage is below 12V.
• Primary firmware & Detector firmware number – updates for these
are posted periodically at www.jamartech.com.
• Count Type – defaulted to Per Vehicle
•
Counter Status
– this will be either Not Counting if no count is in
progress or
Counting...
if a count is in progress.
• Date/Time – this is the date & time current programmed in the unit.
You will be shown a warning that the date and time are not correct if they
are not within a minute of the computer’s date and time. This will be
automatically corrected the next time you upload settings to the unit.