Jamar Black Cat II Plus, User Manual

Page: 25 / 44

3-7
Connecting the Black Cat II Plus Radar
to Your Computer – Hardwire Ethernet
The Power over Ethernet (PoE) port of the Black Cat II Plus can be used
to connect your Radar directly to a local network.
To do this, plug an Ethernet cable into the PoE port of the Black Cat.
To connect to your computer using the Ethernet connection, your Black
Cat must have an IP address assigned to it. For a PoE connection, this
would typically be assigned by your IT or network administrator. When
connecting to the Black Cat you will then use the
Remote Site
selec-
tion in the STARnext software, as described in the next section of this
manual.