background image

page: 7 / 20

3.

Instructions of shipment, unpacking and installation

3.1.

Delivery

1x Terrace awning Type: Weekend EVO,

Brackets ordered in accordance by the Type (Wall-, Ceiling- or Rafterin an amount according to the

Table:

Dimensions (cm)

Depth: 220 - 365

Depth: 366 - 480

Depth: 481 - 600

Width: 150 - 200

2

3

3

Width: 250 - 350

2

3

4

1x Service Manual,

1x Operating and Maintenance Instructions, Warranty,

1x E-Connections and settings (for motor drive),

1x User manual for Weather Automatic (only for Awnings with Sun-Wind Automatic),

1x Remote Control (only for remote controlled Awnings),

1x Handle (only for Awnings with manual drive or with motor drive Type: NHK),

1x Test run or programming cable (only by special order),

1x Handing over protocol/Waranty.

3.2.

General remarks

Note

The awning is supplied without mounting material. The components of the awning
meet the applicable rules and technology. Changes in the design are allowed only with
permission of DRAGON, Korgul, Prochowski Sp. J. Changes in the design of the
awning without the written consent of the manufacturer could void the warranty.

Note

Installation of awning, adjustment and checking of proper operation can be performed
only by trained installation teams. Installation team is responsible for correct
installation (with the appropriate anchors for the basis) readjustment and test run of the
awning.

3.3.

Service, shipment, unpacking and storage

The awning is so packed that it can be delivered without damage. During loading and unloading of the
awning be sure it was not placed on an uneven surface. We recommend carrying this awning by two people.
Upon unpacking the product you keep a special care not to damage the fabric.

CAUTION!

Do not remove tapes from the folding arms of awning earlier than specified in this
manual.

If the awning will be stored for a long time, before installing we recommend:

Store the awning in the shade.

Protect the awning from moisture and high temperature difference.

Protect an awning from shock and/or load.

Summary of Contents for Jupiter





















Reviews: