TM/TMC/RM/RMC-9730CL
26
Software Introduction
Figure 19.
Use Add/Remove to uninstall AccuPiXEL software.
6.1.5
Accessing the AccuPiXEL software
Once the software has installed go to the “Start” menu on the main screen to run AccuPiXEL. Click
on All Programs>AccuPiXEL Camera V5.0.0>AccuPiXEL Camera. This opens the small selection dialog
box used to configure the camera to run AccuPiXEL.
Figure 20.
The Start Menu gives easy access to the AccuPiXEL software.
6.1.6
Connection
A dialog box opens to allow interface selection. Select ComPort and enter port number that the
camera is connected to. (User should be familiar with their PC ComPorts settings.)
6.1.7
Framegrabber Choices
The function choices are ComPort, CamLink 1.0 and CamLink 1.1. Choose either CamLink 1.0 or
CamLink 1.1.
Select Frame Grabber board index. This index is for users who install multiple Camera Link
framegrabbers. For a single board user, the index is selected as zero for default.
Summary of Contents for TM-9730CL
