Software Introduction
25
TM/TMC/RM/RMC-9730CL
Figure 18.
The extraction creates a directory named “69-0094 rev C”
3.
Open the directory and double-click on setup to begin the install.
4.
Follow the installation instructions.
Note: You can change the installation directory if you want.
6.1.3
Installing the Camera Link API DLL (clserXXX.dll)
To install the Camera Link control software with frame grabber software, please consult the frame
grabber company or JAI Inc.
The AccuPiXEL software does not function if a frame grabber can not be located. The current JAI
Cam2Net software installs the frame grabber dll “clsrc2n.dll”. For more details on compatible frame
grabbers see the “ReadMe” file in the “69-0094 rev C” directory created from the AccuPiXEL
download.
6.1.4
Uninstalling the Software
You might want to uninstall the previous version of AccuPiXEL before installing version 4.4.1 You can
uninstall the AccuPiXEL series camera-control software from the control panel. To uninstall, follow
the steps below.
1.
Open “Add or Remove Programs” in the control panel.
2.
Select the old version of AccuPiXEL camera software from the list of installed software.
3.
Click the “Change/Remove” button, then click “Yes” to confirm.
Summary of Contents for TM-9730CL
