Configurable Options
41
TM/TMC/RM/RMC-9730CL
10
Configurable Order Options
10.1
OP1-5 ALC (Automatic Level Control)
ALC keeps the average of output level to a specific value (available for users to specify). ALC is
achieved by implementing both AGC (automatic gain control) and AEC (automatic exposure control).
AGC controls gain from 8dB to 28dB. AEC controls exposure time from 31.8uS to 33.3mS. Therefore,
the camera is possible to work at a very wide dynamic range (10000:1).
Note: When ALC is active, LUT must be either Linear or Gamma .45. Selecting any other knee control
LUT may cause an unstable result.
10.2
OP2-1 Imager Blemish Map
10.3
OP2-5 Blemish Correction (monochrome only)
In an attempt to provide blemish free images the TM-9730CL has a built-in blemish correction
feature. Through a calibration process, all blemished pixels are detected and their positions are
stored in an EEPROM in the camera. The known blemished pixels are corrected by replacing the
value of the nearest neighbor pixels. This feature is only available in monochrome cameras.
10.4
OP21-UV UV Imager(monochrome only)
Microlensless and glassless imager. No imager warranty with this option.
10.5
OP22-5-1 Extended Temperature
-40°C — +65°C (reduced performance may occur).
10.6
OP22-5-5 Conformal Coat
10.7
OP25-3 RS-232 on 12P
Not available with Y/C (OP27-3)
10.8
OP27-1 RS-170 Video Timing
Analog frame buffer for RS-170 video conversion for local monitors, recorders, or other video
standard equipment.
Summary of Contents for TM-9730CL
