Software Operation
13
TM/ RM -1327GE Series
9.
For information on other network card installs click “Start”-->”JAI A.S”-->”Cam2Net”--
>”Documentation”-->” Cam2Net IP Device Drivers”. An Acrobat file has instruction to help
guide you through the proper install.
10.
Go to “
Start” --> “Programs” --> “JAI AS” --> “Cam2Net” --> “Launch Coyote application
”
to launch the camera control tool.
1.4.3
Uninstalling the Software
To uninstall the JAI GigE camera-control software from the control panel, use the following steps:
1.
Open “Add or Remove Programs” in the control panel.
2.
Select “JAI Cam2Net” from the lists of the installed software.
3.
Click the “Change or Remove” button as shown in Figure 3.
Figure 3.
Change and Remove Buttons
[screen shot]
1.4.4
Quick-Start
Use the following quick-start process when the Camera Interface Application is installed on your PC.
1. Connect the camera. The Hirose pin layout is shown in Table 1 on page 6. Both the Hirose and
the network cable (RJ-45) are illustrated in Figure 6.
2. Run the Camera Interface Application.
3. Click “Detect.” Assign a suitable IP address to the camera. The window shown in Figure 4
appears.
Figure 4.
Network Device Finder Window
[screen shot]
4. Select the appropriate camera from the list, similar to the window shown in Figure 5 and click
OK.
Figure 5.
Select Camera Window
[screen shot]
5. Go to the “Acquisition” tab and click Start. An image stream should appear.
6. Click Configure and open the “GigE Camera Software” dialog box. This is your integrated
control software.
Note: the color version (TMC-1327GE) requires color interpolation to be performed in the frame
grabber or by using the host computer’s CPU. In default mode, the camera supports 2 x 2 color
interpolation. For better color performance, the user can select 3 x 3 interpolation in the
Camera Interface Application. Go to the “Acquisition” tab and click Configure. In the
Summary of Contents for TM-1327GE Series
