JAI TM-1327GE Series, User Manual, Page: 23 / 52

Signal Handling 23
TM/ RM -1327GE Series
4 Signal Handling
This section describes the signal handling of the GE cameras in the following section:
•
“Camera Inputs” on page 18
•
“GPIO Control Block” on page 19
•
“GPIO Label Tables” on page 21
•
“Pulse Generators” on page 23
Refer to the Cam2Net User’s Manual for additional details.
4.1 Camera Inputs
For information on the polarity and type of the signals required to support specific camera
functions, refer to “Asynchronous Reset” on page 42
The TM-1327GE has three externally controllable standard signals:
•
Trigger (VINIT or EXT_TRIG) (CC1 equivalent)
•
VD in (EXT_VD) (CC3 equivalent)
•
HD in (EXT_HD) (CC4 equivalent)
The labels for these signals in the GPIO Control Block programming language are:
•
I0, for VINIT (must be configured as EXT_TRIG)
•
I1, for VD in (must be configured as EXT_VD)
•
I2, for HD in (must be configured as EXT_HD)
4.2 GPIO Control Block
Figure 22 below shows the GPIO Control Block signals for the GE Cameras.
Figure 22. GE Camera GPIO Control Block