JAI TM-1327GE Series, User Manual, Page: 27 / 52

Serial Commands 27
TM/ RM -1327GE Series
Table 5 18 Bytes Status Report
Byte 1, 2 MGA Gain Control (H’0000 - H’00FF)
Byte 3, 4 VTOP VTOP (H’0080 - H’00C0)
Byte 5, 6 VBTM VBOTTOM (H’0078 - H’00FF)
Byte 7,8 Reserved
Byte 9 Function Flag 0
Bit 7 output pixel order 1 “00”=<-- “10”=<-- “01”=<--
Bit 6 output pixel order 0
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Byte 10 Function Flag 1
Scan Mode Full/Partial Scan
Bit 7 ShutterMode2
Bit 6 ShutterMode1
Bit 5 ShutterMode0
“000”=Manual Shutter
“001”=Async Shutter
“010”=Async Direct Shutter
“011”=Direct Shutter
Bit 4 Output Data Depth 0=8 bit 0=8bit; 1=10bit
Bit 3
Bit 2
Bit 1
Bit 0
Byte 11 Function Flag 2
Bit 7 LUTSIGN 0=Positive LUT; 1=Negative LUT
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2 LUTTABLE2 “000”=Linear LUT
Bit 1 LUTTABLE1 “001”=Gamma.45 LUT
Bit 0 LUTTABLE0 “010”=Two Knee Table
Byte 12 Function Flag 3
Bit 7 TESTPATTERN 0=Disable TP; 1=Enable TP
Bit 6 Reserved System Flag
Bit 5
Bit 4 Reserved System Flag
Bit 3
Bit 2
Bit 1
Bit 0 Reserved System Flag
Byte 13 X1
Byte 14 Y1
(X1, Y1) Coordinate for Knee 1
(X1, Y1 = H’00 - H’FF)
Byte 15 X2 (X2, Y2) Coordinate for Knee 1