JAI TM-1327GE Series, User Manual, Page: 31 / 52

Hardware Installation 31
TM/ RM -1327GE Series
7 Installation
The following instructions will help you to set up your camera quickly and easily. JAI suggests that
you read through these instructions first, before you unpack and set up your camera system.
7.1 Getting Started
7.1.1 Unpacking Instructions
JAI recommends that you save the original packing cartons for the cameras and accessories in case
you need to return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field
installation to assure that everything is fully operational as a system.
7.1.2 Components
When you receive your TM-1327GE camera from JAI, the contents of the shipping box should include
the camera and a document download card. If either of these items are missing, contact your JAI
representative immediately. The document download card includes instructions and web locations
for downloading the datasheet, manual, and camera-control software. If you do not have Internet
access, contact JAI to receive this material on a CD-ROM.
7.1.3 Accessories and Options
The following additional accessories and options may be required for your application:
•
PD-12U series power supply
•
12P-02S power cable
•
Cat5e or cat6 shielded Ethernet cable (not supplied by JAI)
Check with your JAI representative before you install your camera to determine what you might
need.
7.2 Camera Setup
7.2.1 Heat Dissipation
The TM-1327GE is a compact camera. Since all the electronics have been packed in a compact
package, the outer case of the camera can become hot because of heat dissipation. For optimal
performance, JAI recommends using a cooling fan to set up a positive air flow around the camera
and following the precautions below.
•
Mount the camera on a large heat sink (camera bracket) made out of a heat-conductive
material like aluminum.
•
Make sure the flow of heat from the camera case to the bracket is not blocked by a non-
conductive material like plastic.
•
Make sure the camera has enough open space around it to facilitate the free flow of air.
Contact JAI at (800) 445-5444 or send an E-mail to camerasales.americas@jai.com if you have any
questions.
7.2.2 Connector Pin Configurations
The TM-1327GE has a 12-pin Hirose connector for power input and signal integration as shown in
Figure 24.