![background image](http://html1.mh-extra.com/html/u-prox/keypad-mf/keypad-mf_user-manual_3084800001.webp)
Integrated Technical Vision Ltd.
http://www.itvsystems.com.ua
1
U-Prox-Keypad MF.
Mifare reader. User manual
Introduction
The Mifare U-Prox-Keypad MF reader with built in keypad is
intended to be applied in different access control systems, using
RS232, Wiegand 26, Wiegand 32, Wiegand 34, Wiegand 37,
Wiegand 40, Wiegand 42 and Touch Memory interface.
The direct and reverse ID bytes order supported. Secure mode with
reader and cards serialization available.
The interface type is to be changed by special PC program. If you need to change the
interface type, please call your distributor. The reader placed in elegant plastic case with
bicolor LED indicator and keypad on front panel.
Types of cards
Integrated Technical Vision ltd manufactures readers operating with various kinds of Mifare
®
cards: MIFARE
®
Standard, MIFARE
®
Hi-Memory, MIFARE
®
Ultralight, MIFARE
®
DESFire,
MIFARE
®
CLASSIC 1k, MIFARE
®
Classic 4k, MIFARE
®
CLASSIC 7UID.
Features
Case
Material
ABS plastic
Color
black
Dimensions
119.4
х 65.4 х17.5
mm
Weight
240 g
Ambient Conditions
Oper. temp.
-0
°C . . . +60°C
Stor. temp
-0
°C . . . +80°C
Humidity
100% rel. at +25
0
C
Electrical
Voltage
+9. . . +16 VDC
Max current
up to 75 mA
Voltage ripple
up to 500 mV
p-p
.
Read Range
Typical read range is
40…50 mm and depends on tag type used.
Wiring
Reader has 8 wire cable for connecting to the access control panel.
Table 1. The wires assignment.
Wiegand
RS232 (reader)
DB-9 (computer)
Color
Function
Green
Data 0
Rx
3
White
Data 1
Tx
2
Red
+V
+V
Black
GND
GND
5
Brown
Red Led
-
Orange
Green Led
-
Blue
Beep
-
Yellow
Hold
Hold
AWG22 multiwire signal cable is recommended.
Using this cable the maximum length of 150
meters can be obtained
*
.
When you connect the reader to the interface
TouchMemory (iButton), and it does not work
consistently (for example, does not transmit the
*
Not for RS232 interface
Figure 1