SW-4000TL-SFP
— 24 —
Exposure Mode
The following operation modes are available on the camera.
Image Output Timing
■
Trigger Control
In this camera, the following control is performed by the external trigger signal.
Exposure Mode
Trigger Mode
OFF
ON
OFF
ON
Trigger Width
ON
Operation mode
OFF
Timed
Trigger Selector
Description
FrameStart
Imaging of one frame is started by input of external trigger signal.
AcquisitionStart
Start image acquisition in response to the external trigger signal input.
AcquisitionEnd
Stop image acquisition in response to the external trigger signal input.
FrameTransferStart
Output acquired images at a specified timing in response to an external
trigger signal input.
* There is a limit to the number of image frames that can be stored
internally. The limits for each image format are as follows. Acquired
images must be output to avoid exceeding these limits.
Example : (PixelFormat RGB8, Width 4096, Height 4096)
It is possible to hold 4 frames of images.
Line Start
Imaging of one line is started by input of external trigger signal.
