JAI SW-4000T-10GE, User Manual

Page: 56 / 66

Setting range Default value Description
Configure shading correction settings.
FlatShading,
ColorShading FlatShading Select the shading correction method.
Off,
User1,
User2,
User3 Off Set the area to which to save shading correction data.
When this is set to [Off], shading correction data is not saved.
ー ー Execute shading correction.
This command can not be excuted under the following conditions.
・When no image is output.
・Outputting TestPattern.
・When the ROI setting is under the following conditions.
(Width or Height are less than 128)
・Shading Mode is Off.
ー Idle Display the shading correction results.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Red, Green, Blue Red Read the shading correction data and select the sensor to be changed.
1 〜 1024 1 Set the index table number for shading correction.
0 〜 0x1FFFF 0x4000 Display the result of shading correction.
ー ー Save the result of shading correction.
Setting range Default value Description
Correct variations due to sensors and lenses.
Off, Default, User1,
User2, User3 Default Select the user area to which to save the black level correction value.
ー ー Generate black level correction data automatically from the captured image.
Caution
When [Pixel Black Correction Mode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー ー Display the results of
[Calibrate Pixel Black Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Default, User1,
User2, User3 Default Select the user area to which to save the gain correction value.
ー ー Generate gain correction data automatically from the captured image
Caution
When [PixelBlackCorrectionMode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー ー Display the results of
[Calibrate Pixel Gain Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Lens1, Lens2,
Lens3 Off Correct the color aberration that occurs at the left and right edges due to
lens characteristics.
Chromatic Aberration Correction
Selector R Channel,
B Channel R Channel Specify the channel for which to perform[Chromatic Aberration Correction
Lens1,2,3].
Chromatic Aberration Correction -4.0 to +4.0
(0.1 step) 0 Set the amount of correction for
[Chromatic Aberration CorrectionLens1,2,3].
Calibrate Pixel Gain Correction
Pixel Gain Calibration Result
Chromatic Aberration Correction Mode
Calibrate Shading Correction
Shading Calibration Result
Shading Data Selector
Shading Data Index
Shading Data
Shading Data Save
r） Correction
Pixel Black Correction Mode
Item
Calibrate Pixel Black Correction
Pixel Black Calibration Result
Pixel Gain Correction Mode
Shading Mode
Shading Correction Mode
q） Shading
Item
SW-4000T-10GE
—
56 —