![background image](http://html.mh-extra.com/html/jai/sw-4000t-10ge/sw-4000t-10ge_user-manual_631580041.webp)
— 41 —
Acquisition Start, Acquisition End,
Frame Start, Frame End,
Line Start, Line End,
Exposure Red Start, Exposure Red End,
Exposure Green Start, Exposure Green End,
Exposure Blue Start, Exposure Blue End,
Line1 Rising Edge, Line1 Falling Edge,
Line4 Rising Edge, Line4 Falling Edge,
Line5 Rising Edge, Line5 Falling Edge,
Line8 Rising Edge, Line8 Falling Edge,
Line9 Rising Edge, Line9 Falling Edge,
Line10 Rising Edge, Line10 Falling Edge,
Line12 Rising Edge, Line12 Falling Edge,
Line13 Rising Edge, Line13 Falling Edge,
LVAL Start, LVAL End
SW-4000T-10GE
Event Control Function
The Event Control Function is a function that outputs a signal change point inside the camera
as information indicative of an event occurrence (event message) by using GVCP (GigE Vision
Control Protocol).
■
Events that can use the Event Control Function
Events that can use the Event Control Function are as follows. You can specify whether or not
to send an event message when an event occurs at each event.
Detect an event
Keep the event type and
timestamp value when an event
occurs.
Interrupt signal
Event signal
Send an event message
MCU inside the camera
Reset event information after an
event message has been sent
■
Flow from detecting an event to sending an event message
Summary of Contents for SW-4000T-10GE
Page 60: ...SW 4000T 10GE 60 Spectral Response Wave length nm Relative Response Wave length nm ...
Page 61: ...SW 4000T 10GE 61 Dimensions F mount SW 4000T 10GE F Dimenstional tolerance 0 3mm Unit mm ...
Page 62: ...SW 4000T 10GE 62 M52 mount SW 4000T 10GE M52 Dimenstional tolerance 0 3mm Unit mm ...