JAI SW-4000T-10GE User Manual Download Page 6

Page: 6 / 66

Features

SW-4000T-10GE

The SW-4000T-10GE is a 3CMOS line scan camera using three 4096 pixel line sensors

mounted on a prism, for the R, G and B channels.

The camera has a 10 Gigabit Ethernet interface supporting RGB output at 8-bits or 10-

bits per channel, as well as YUV422_8 or YUV422_8_UYVY color formats.

Features overview

• Prism technology for superior color quality and better color differentiation.

• Pixel size can be switched (7.5 μ m x 7.5 μ m, 7.5 μ m x 10.5 μ m)

• Supports vertical dual-line binning, 2x horizontal binning, or both.

• High-speed scanning

maximum line rate

Pixel format: YUV422(8bit) : 145kHz

Pixel format: RGB(8bit) : 97kHz

• HSI, sRGB, Adobe RGB and XYZ color space conversion.

• Support for connection of rotary encoders.

• Excellent shock and vibration resistance.

• GenICam compliant.

Connection example:

Camera

External Trigger

AC adapter

Switching hub (PoE+ support)

— 6 —

Lens

Summary of Contents for SW-4000T-10GE



































































Search results

Summary of Contents for SW-4000T-10GE

Reviews:

Related manuals for SW-4000T-10GE

Brands by name

Popular brands

JAI SW-4000T-10GE, User Manual

Search results

Summary of Contents for SW-4000T-10GE

Reviews:

Related manuals for SW-4000T-10GE

Brands by name

Popular brands