Item
Setting value / selectable range
Trigger Mode
On
Trigger Selector
Line Start
Trigger Source
Any
Trigger Activation
LevelHigh
(high-level duration)
,
LevelLow
(low-level duration)
Exposure Mode
TriggerWidth
(control via trigger width)
Item
Setting value / selectable range
Trigger Mode
On
Trigger Selector
Line Start
Trigger Source
Any
Trigger Activation
Rising Edge
(rising edge of input signal)
,
Falling Edge
(falling edge of input signal)
Exposure Mode
Timed
(control via exposure time)
Exposure Time
Varies depending on settings.
SW-4000T-10GE
— 17 —
Step 5 Configuring Basic Settings for the Camera
1
Set [Exposure Mode] to [Timed].
2
Specify the exposure time in [Exposure Time].
3
Set [Trigger Mode] to [On] and set [Trigger Selector] to [Line Start].
4
If necessary, change the [Trigger Source], and [Trigger Activation] settings.
When Controlling the Exposure Time Using Specified Exposure Times
Configure the settings as follows.
■
Control via External Triggers
When Controlling the Exposure Time Using the Pulse Width of the Trigger
Input Signal
Configure the settings as follows.
1
Set [Trigger Mode] to [On] .
2
Set [Exposure Mode] to [Trigger Width] .
3
If necessary, change the [Trigger Source] and [Trigger Activation] settings.
Summary of Contents for SW-4000T-10GE
Page 60: ...SW 4000T 10GE 60 Spectral Response Wave length nm Relative Response Wave length nm ...
Page 61: ...SW 4000T 10GE 61 Dimensions F mount SW 4000T 10GE F Dimenstional tolerance 0 3mm Unit mm ...
Page 62: ...SW 4000T 10GE 62 M52 mount SW 4000T 10GE M52 Dimenstional tolerance 0 3mm Unit mm ...
