SW-2000M-CL-65
20
The four groups will be described in detail in the following sections. Most commands display
help on how to use it if a question mark is added after the command, and current status of the
function if the command is entered as such with no parameters.
The general principle with all the group B and C commands is that users may experiment with
the settings without losing the latest, saved and working setup (exception: CS FACTORY RESET).
New settings are in use, but not permanently saved, until the user decides to save them. It is
always possible to return to the latest saved settings either by sending the CS LOAD or REBOOT
command or power cycling the camera.
NOTE: The CS FACTORY RESET command also saves the new values.
