SW-2000M-CL-65
11
5.1.2
Image processing
The output data from the imager is buffered for further processing to be then finally sent out of
the camera via the Camera Link interface. The processing chain is controlled by user accessible
commands. The DSNU corrector is calibrated individually for each camera at the factory and
always in use with fixed settings.
The scan rate and the integration of light within each line period can be controlled either by
the Camera Link input signals CC1 and CC2, internal timers, or a combination of these.
Serial communication channels are used to control and monitor the camera. Both the standard
Camera Link serial channel as well as the Ethernet connection can be used for the same
purpose and even at the same time. Some functions are only supported via Ethernet.
Fig.6. Image processing block diagram
