SW-2000M-CL-65
19
7
Description of commands
The commands can be divided into four groups:
Group A: General settings
MODE
for selecting operating mode after boot-up.
NET
for network settings for the Ethernet command communication. NET settings are saved
automatically.
CS SAVE
,
LOAD, SAVE2, LOAD2
and
FACTORY RESET
for saving, loading or restoring the
settings of group B and C.
Group B: Commands affecting exposure
SENSOR
for setting sensor responsivity.
LINE RATE
and
LINE PERIOD
for setting the scan rate.
LINE IT
for selecting the actual light integration time.
LINE CTRL
for selecting the trigger source.
GAIN
for setting the camera gain.
OFFSET
for setting the line offset value.
FFC
for Flat Field Correction.
Group C: Commands affecting image output format
CL MODE
for setting the Camera Link output format.
CL RATE
for setting the pixel clock frequency.
READOUT
for selecting normal or reverse readout direction.
ROI
for selecting Region Of Interest.
BINNING
for combining adjacent pixels.
Group D: Utilities
HELP
or
‘?’
for list of all commands.
STATUS
to display camera information and settings.
VER
for displaying firmware versions and camera identifiers.
TEST
for selecting test patterns.
REBOOT
for restarting the camera.
FIRMWARE UPDATE
to change the MCU code.
