![background image](http://html1.mh-extra.com/html/jai/go-5100m-pge/go-5100m-pge_user-manual_3227058077.webp)
GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0)
Main Functions
- 77 -
Video Process Bypass Mode
The video process bypass mode is a function that bypasses internal video processing on the camera.
When bypass is enabled, the sensor output and camera output data can be set to the same bit width.
Operation using 12-bit outputs must be performed in bypass mode.
Video Process
Bypass Mode
ON
OFF
Camera operation
All video processes except Gain all (excluding R/B Gain) and
Blemish Compensation are disabled.
All video processes
are enabled.
Camera output
8/10/12 bit
8/10 bit
Differences in camera operation
l
Video Process Bypass Mode = OFF
: All video processes are enabled.
l
Video Process Bypass Mode = ON
: All video processes except Gain all (excluding R/B Gain)
and Blemish Compensation are disabled.
Note:
Binning function cannot be used in video process bypass mode.
To enable video process bypass mode
1. Set
VideoProcessBypassMode
(JAICustomControlMisc) to
On
.