![background image](http://html1.mh-extra.com/html/jai/go-5100m-pge/go-5100m-pge_user-manual_3227058058.webp)
GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0)
Main Functions
- 58 -
Line Status
Related Setting Items:
The line status function allows you to verify the status of external input/output signals. You can verify
the status of the following signals.
l
Opt Out 1, Opt Out 2, Opt In 1
l
Time Stamp Reset
l
NAND Gate 0 In 1, NAND Gate 0 In 2, NAND Gate 1 In 1, NAND Gate 1 In 2
Defective Pixel Correction Function
Related Setting Items:
Multiple defective pixels that are not adjacent to each other can occur on conventional CMOS sensor
cameras. This camera features a function that interpolates defective pixels using the surrounding
pixels. Up to 256 pixels can be corrected. Pixel interpolation can be performed via automatic detection
or point-by-point manual settings.
Automatic Detection
Automatic detection can only detect lit defective pixels (i.e., white blemishes).
1. Shield the camera sensor. If a lens is attached, use the lens cap as a shield, for example.
2. Configure the threshold level for defective pixel detection. Specify the threshold value for the
blemishes to be detected using the JAI Custom Control Blemish - Blemish Detect Threshold
setting.
l
The threshold value is specified as a percentage
l
The default setting is "10" with 10% of the full scale (100%) specified as the threshold
value.
3. Execute
Blemish Detect
to start automatic detection. After detection, the interpolation data is
saved to the camera's internal memory.
To check the number of interpolated pixels after automatic detection
You can check the number of pixels interpolated via automatic detection by loading the BlemishNum
data.