GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0)
Features
- 13 -
Features
This camera is an industrial progressive scan camera equipped with a 2/3-inch global shutter CMOS
image sensor with 5.1 effective megapixels (2464 × 2056). The unit is compact and lightweight in
design and is equipped with GigE Vision Ver. 2.0 interface. The monochrome camera produces
monochrome output while the color camera produces Bayer output.
Compact and Lightweight
The unit’s compact size (approx. 29mm × 29mm × 41.5mm, excluding lens mount) and lightweight
design allows for easy assembly and installation.
Gigabit Ethernet interface supporting GigE Vision Ver. 2.0
l
High-speed transfer at up to 1 Gbps of uncompressed data, the ideal format for image
processing.
l
Connection of multiple cameras and computers supported through use of a switching hub, etc.
l
Maximum cable length of 100 m.
l
Support for IEEE802.af-compliant PoE (Power over Ethernet) allowing you to supply power to
the camera via the LAN cable.
Note:
Interface card or switching hub must support PoE. Alternatively, power can be supplied via
the 6-pin connector using an op12 to +24V DC power supply.
Output Formats
You can choose from 8-bit, 10-bit, and 12-bit* output for both monochrome and Bayer.
Note:
*As the color camera cannot perform white balance when using 12-bit output, perform white
balance on the application.
High Frame Rate
This camera is capable of frame rates of up to 22.7 fps (8-bit format) for full 5.1-megapixel output.
Even faster frame rates can be achieved when binning is utilized (Monochrome models only) or when
a smaller ROI (region of interest) is specified.
ALC (Automatic Level Control) Function
Combine the automatic gain control and automatic exposure control functions to allow handling of
changes in various brightnesses.
